The detector based on the principle of electrode immersion resistance change to carry out water accumulation detection.
It adopts MCU intelligent detection method, probe anti-rust design, has good sensitivity, low power consumption, stable operation, novel shape, beautiful appearance and simple installation. It can be widely used in residents and basements, waterways, water towers, water pipes, water rooms, swimming pools, solar energy and other water storage equipment and places where water leakage or overflow may happen.
The J-EIH27 water immersion detector (detector for short) is a household intelligent wireless detector that powered by internal batteries.
The detector can quickly detect water immersion signal in the event of water pipes broken down or water leakage without supervision.
It will alarm and send the information of the detector status to mobile phones via intelligent gateway.
Working current: DC3V (1 CR 123A battery)
standby current: ≤5uA
Alarm current: ≤18mA
Battery life : no less than three years (normal work)
ambient temperature: -10 ° C ~ +55 ° C
Relative humidity : ≤95% RH (non condensation)
Indicators: Red,alarm
Green,normally work
Yellow,fault
